[UseMoney=2]CATLM_ODTS=1 – 启动时不显示许可证错误
CATNoStartDocument=no – 启动时不产生product
CNEXTBACKGROUND = no – 启动时不产生背景颜色
CNEXTSPLASHSCREEN = no – 启动时不显示ds星空
L_WILSON_LAN=1 - 支持生成Wilson曲线 [/UseMoney]

[此贴子已经被作者于2004-11-21 20:23:22编辑过]

ding

[UseMoney=2]  CGM_ROLLINGOFFSET=1 – 在GSD模式下可以进行旋转偏移
TAILLE_MEMOIRE_CHOISIE=1 – IGES最优化输出
SHOW_CST_CHILDREN = 1 – 草图绘制中，父级说明强调显示
CNEXTOUTPUT = console – 在windows命令中显示CATIA的logo
MM_NO_REPLACE = 1 – 无关联组件装配复位 [/UseMoney]

[UseMoney=2] IRD_PRODUCTTOPART=1 装配模式下隐藏

PRINT_WITHOUT_DEPTH=1 – 移除打印 (限 V5R10)
MFG_MULTI_MP_APPLY = 1 –多实例制造过程

MFG_CATMFG_REMOVE_MOTION_TOOL_CHANGE = 1 –移除到 X Y Z   [/UseMoney]

[UseMoney=2]     V4/V5移植变量：
KEEP_HIDDEN_ELEMENT=1
#No Show Elements are migrated
cleanV4Topology=1
#It cleans topology automatically
CATMigrSolidMUV4AsPart=1
#By Pasting "As_SPEC" It migrates SolidM into CATPart
REPORT_BREP_INFO=1
#It makes migration report
V5V4SaveAsVolume=1
#It migrates *SOL to *VOL
V5V4CleanTolerance=0.01
#maximum gap used by automatic topology cleaner
V5V4MaxSimplif=1
#It tries to concatenate small surfaces with large adjacent surfaces     [/UseMoney]

不错，~~还有吗？

确是好东西啊，这样才能精益求精。

我要。

确实不错，顶！

黑心