最新后处理配置文档 MPMASTERX3.PST
最新后处理配置文档 MPMASTERX3.PST
[POST_VERSION] #DO NOT MOVE OR ALTER THIS LINE# V11.00 E1 P0 T1161869177 M11.00 I0
# Post Name : MPMASTER
# Product : MILL
# Machine Name : MACHINE
# Control Name : CONTROL
# Description : IHS MASTER GENERIC MILL G-CODE POST
# 4-axis/Axis subs. : YES
# 5-axis : NO
# Subprograms : YES
# Executable : MP v11.1.0.0
# Post Revision : 11.1.0811 (MC_FULL.MC_MINOR.YYDDD)
#
# WARNING: THIS POST IS GENERIC AND IS INTENDED FOR MODIFICATION TO
# THE MACHINE TOOL REQUIREMENTS AND PERSONAL PREFERENCE.
............................
IHS 01/24/08 - Axis sub for VMC with B-axis and axis sub errors, wbt
# IHS 02/06/08 - Stockleft variable & logic, rjj
# IHS 04/17/08 - In signed absolute mode angles greater than 360 will post out, sxc
# IHS 08/11/08 - Updated parameters,machine & control def for X3, gck
# XXX MM/DD/08 - Written for Company X from Mpmaster, xxx
#
# --------------------------------------------------------------------------
# Features:
# --------------------------------------------------------------------------
# This post supports Generic Fanuc code output for 3 and 4 axis milling.
# It is designed to support the features of Mastercam X Mill.
[ 本帖最后由 lxing00000 于 2008-9-10 21:53 编辑 ]
附件: 您所在的用户组无法下载或查看附件
