金属材料英文词汇 No.2(转贴)

tocachina

钢的种类 Type of Steel <BR>表面处理 Surface Finish <BR>常用尺寸 Commonly Used Size <BR>电器用硅 [硅] 钢片 Electrical Steel Sheet <BR>简介 General <BR>软磁材料 Soft Magnetic Material <BR>滞后回线 Narrow Hystersis <BR>矫顽磁力 Coercive Force <BR>硬磁材料 Hard Magnetic Material <BR>最大能量积 Maximum Energy Product <BR>硅含量对电器用的低碳钢片的最大好处 <BR>The Advantage of Using Silicon low Carbon Steel <BR>晶粒取向(Grain-Oriented)及非晶粒取向(Non-Oriented) <BR>Grain Oriented &amp; Non-Oriented <BR>电器用硅 [硅] 钢片的最终用途及规格 <BR>End Usage and Designations of Electrical Steel Strip <BR>电器用的硅 [硅] 钢片之分类 <BR>Classification of Silicon Steel Sheet for Electrical Use <BR>电器用钢片的绝缘涂层 <BR>Performance of Surface Insulation of Electrical Steel Sheets <BR>晶粒取向电器用硅钢片主要工业标准 <BR>International Standard – Grain-Oriented Electrical Steel Silicon Steel Sheet for Electrical Use <BR>晶粒取向电器用硅钢片 Grain-Oriented Electrical Steel <BR>晶粒取向，定取向芯钢片及高硼定取向芯钢片之磁力性能及夹层系数(日工标准及美材标准) <BR><BR>Magnetic Properties and Lamination Factor of SI-ORIENT-CORE&amp; SI-ORIENT-CORE-HI B Electrical Steel Strip (JIS and AISI Standard) <BR>退火Annealing <BR>电器用钢片用家需自行应力退火原因 <BR>Annealing of the Electrical Steel Sheet <BR>退火时注意事项 Annealing Precautionary <BR>碳污染 Prevent Carbon Contamination <BR>热力应先从工件边缘透入 <BR>Heat from the Laminated Stacks Edges <BR>提防过份氧化 <BR>No Excessive Oxidation <BR>应力退火温度 <BR>Stress –relieving Annealing Temperature <BR>晶粒取向电器用硅 [硅] 钢片 – 高硼(HI-B)定取向芯钢片及定取向芯钢片之机械性能及夹层系数 <BR><BR>Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B and SI-ORIENT-CORE Grain Orient Electrical Steel Sheets <BR>晶粒取向电器用硅 [硅] 钢;片 – 高硼低硫(LS)定取向 钢片之磁力及电力性能 <BR><BR>Magnetic and Electrical Properties of SI-ORIENT-CORE-HI-B-LS <BR>晶粒取向电器用硅 [硅] 钢片 – 高硼低硫(LS) 定取向钢片之机械性能及夹层系数 <BR><BR>Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B-LS <BR>晶粒取向电器用硅(硅)钢片-高硼(HI-B)定取向 芯钢片，定取向芯钢片及高硼低硫(LS)定取向芯钢片之厚度及阔度公差 <BR><BR>Physical Tolerance of SI-ORIENT-CORE-HI-B, SI-ORIENT-CORE, &amp; SI-CORE-HI-B-LS Grain <BR>Oriented Electrical Steel Sheets <BR>晶粒取向电器用硅(硅)钢片 – 高硼(HI-B)定取向 芯钢片，定取向芯钢片及高硼低硫(LS)定取向芯钢片之标准尺寸及包装 <BR><BR>Standard Forms and Size of SI-ORIENT-CORE-HI-B,SI-CORE, &amp; SI-ORIENT-CORE-HI-B-LS Grain- <BR>Oriented Electrical Steel Sheets <BR>绝缘表面 Surface Insulation <BR>非晶粒取向电力用钢片的电力、磁力、机械性能 及夹层系数 <BR><BR>Lamination Factors of Electrical, Magnetic &amp; Mechanical Non-Grain Oriented Electrical <BR>电器及家电外壳用镀层冷辘 [低碳] 钢片 <BR>Coated (Low Carbon) Steel Sheets for Casing,Electricals &amp; Home Appliances <BR>镀铝硅钢片 Aluminized Silicon Alloy Steel Sheet <BR>简介 General <BR>镀铝硅合金钢片的特色 <BR>Feature of Aluminized Silicon Alloy Steel Sheet <BR>用途 <BR>End Usages <BR>抗化学品能力 <BR>Chemical Resistance <BR>镀铝(硅)钢片 – 日工标准(JIS G3314) <BR>Hot-aluminum-coated sheets and coils to JIS G 3314 <BR>镀铝(硅)钢片 – 美材试标准(ASTM A-463-77)35.7 JIS G3314镀热浸铝片的机械性能 <BR><BR>Mechanical Properties of JIS G 3314 Hot-Dip Aluminum-coated Sheets and Coils <BR>公差 Size Tolerance <BR>镀铝(硅)钢片及其它种类钢片的抗腐蚀性能比较 <BR>Comparsion of various resistance of aluminized steel &amp; other kinds of steel <BR>镀铝(硅)钢片生产流程 <BR>Aluminum Steel Sheet, Production Flow Chart <BR>焊接能力 Weldability <BR>镀铝钢片的焊接状态(比较冷辘钢片) <BR>Tips on welding of Aluminized sheet in comparasion with cold rolled steel strip <BR>钢板 <BR>Steel Plate <BR>钢板用途分类及各国钢板的工业标准包括日工标准及美材试标准 <BR>Type of steel Plate &amp; Related JIS, ASTM and Other Major Industrial Standards <BR>钢板生产流程 <BR>Production Flow Chart <BR>钢板订货需知 <BR>Ordering of Steel Plate <BR>不锈钢 <BR>Stainless Steel <BR>不锈钢的定义 Definition of Stainless Steel <BR>不锈钢之分类，耐腐蚀性及耐热性 <BR>Classification, Corrosion Resistant &amp; Heat Resistance of Stainless Steel <BR>铁铬系不锈钢片 <BR>Chrome Stainless Steel <BR>马氏体不锈钢 <BR>Martensite Stainless Steel <BR>低碳马氏体不锈钢 <BR>Low Carbon Martensite Stainless Steel <BR>含铁体不锈钢 <BR>Ferrite Stainless Steel <BR>镍铬系不锈钢 <BR>Nickel Chrome Stainless Steel <BR>释出硬化不锈钢 <BR>Precipitation Hardening Stainless Steel <BR>铁锰铝不锈钢 <BR>Fe / Mn / Al / Stainless Steel <BR>不锈钢的磁性 <BR>Magnetic Property &amp; Stainless Steel <BR>不锈钢箔、卷片、片及板之厚度分类 <BR>Classification of Foil, Strip, Sheet &amp; Plate by Thickness <BR>表面保护胶纸 <BR>Surface protection film <BR>不锈钢片材常用代号 <BR>Designation of SUS Steel Special Use Stainless <BR>表面处理 Surface finish <BR>薄卷片及薄片(0.3至2.9mm厚之片)机械性能 <BR>Mechanical Properties of Thin Stainless Steel(Thickness from 0.3mm to 2.9mm) – strip/sheet <BR>不锈钢片机械性能(301, 304, 631, CSP) <BR>Mechanical Properties of Spring use Stainless Steel <BR>不锈钢 – 种类，工业标准，化学成份，特点及 主要用途 <BR><BR>Stainless Steel – Type, Industrial Standard, Chemical Composition, Characteristic &amp; end usage of the most commonly used Stainless Steel <BR>不锈钢薄片用途例 <BR>End Usage of Thinner Gauge <BR>不锈钢片、板用途例 <BR>Examples of End Usages of Strip, Sheet &amp; Plate <BR>不锈钢应力退火卷片常用规格名词图解 <BR>General Specification of Tension Annealed Stainless Steel Strips <BR>耐热不锈钢 <BR>Heat-Resistance Stainless Steel <BR>镍铬系耐热不锈钢特性、化学成份、及操作温度 <BR>Heat-Resistance Stainless Steel <BR>铬系耐热钢 <BR>Chrome Heat Resistance Steel <BR>镍铬耐热钢 <BR>Ni - Cr Heat Resistance Steel <BR>超耐热钢 <BR>Special Heat Resistance Steel <BR>抗热超级合金 <BR>Heat Resistance Super Alloy <BR>耐热不锈钢比重表 <BR>Specific Gravity of Heat – resistance steel plates and sheets stainless steel <BR>不锈钢材及耐热钢材标准对照表 <BR>Stainless and Heat-Resisting Steels <BR>发条片 Power Spring Strip <BR>发条的分类及材料 <BR>Power Spring Strip Classification and Materials <BR>上链发条 Wind-up Spring <BR>倒后擦发条 Pull Back Power Spring <BR>圆面("卜竹")发条 Convex Spring Strip <BR>拉尺发条 Measure Tape <BR>魔术手环 Magic Tape <BR>魔术手环尺寸图Drawing of Magic Tap <BR>定型发条 Constant Torque Spring <BR>定型发条及上炼发条的驱动力 <BR>Spring Force of Constant Torque Spring and Wing-up Spring <BR>定型发条的形状及翻动过程 <BR>Shape and Spring Back of Constant Torque Spring <BR>定型发条驱动力公式及代号 <BR>The Formula and Symbol of Constant Torque Spring <BR>边缘处理 Edge Finish <BR>硬度 Hardness <BR>高碳钢化学成份及用途 <BR>High Carbon Tool Steel, Chemical Composition and Usage <BR>每公斤发条的长度简易公式 <BR>The Length of 1 Kg of Spring Steel Strip <BR>SK-5 &amp; AISI-301 每公斤长的重量/公斤(阔100-200公厘) Weight per one meter long (kg) (Width 100-200mm) <BR>SK-5 &amp; AISI-301 每公斤之长度(阔100-200公厘) Length per one kg (Width 100-200mm) <BR>SK-5 &amp; AISI-301 每公尺长的重量/公斤(阔2.0-10公厘) <BR>Weight per one meter long (kg) (Width 2.0-10mm) <BR>SK-5 &amp; AISI-301 每公斤之长度(阔2.0-10公厘) <BR>Length per one kg (Width 2.0-10mm) <BR>高碳钢片 High Carbon Steel Strip <BR>分类 <BR>Classification <BR>用组织结构分类 <BR>Classification According to Grain Structure <BR>用含碳量分类 – 即低碳钢、中碳钢及高碳钢 <BR>Classification According to Carbon Contains <BR>弹簧用碳钢片 <BR>CarbonSteel Strip For Spring Use <BR>冷轧状态 Cold Rolled Strip <BR>回火状态 Annealed Strip <BR>淬火及回火状态 <BR>Hardened &amp; Tempered Strip/ Precision – Quenched Steel Strip <BR>贝氏体钢片 Bainite Steel Strip <BR>弹簧用碳钢片材之边缘处理 Edge Finished <BR>淬火剂 <BR>Quenching Media <BR>碳钢回火 Tempering <BR>回火有低温回火及高温回火 <BR>Low &amp; High Temperature Tempering <BR>高温回火 <BR>High Temperature Tempering <BR>退火 Annealing <BR>完全退火 Full Annealing <BR>扩散退火 Diffusion Annealing <BR>低温退火 Low Temperature Annealing <BR>中途退火 Process Annealing <BR>球化退火 Spheroidizing Annealing <BR>光辉退火 Bright Annealing <BR>淬火 Quenching <BR>时间淬火 Time Quenching <BR>奥氏铁孻回火 Austempering <BR>马氏铁体淬火 Marquenching <BR>高碳钢片用途 End Usage of High Carbon Steel Strip <BR>冷轧高碳钢 – 日本工业标准 <BR>Cold-Rolled (Special Steel) Carbon Steel Strip to JIS G3311 <BR>电镀金属钢片 Plate Metal Strip <BR>简介 General <BR>电镀金属捆片的优点 <BR>Advantage of Using Plate Metal Strip <BR>金属捆片电镀层 <BR>Plated Layer of Plated Metal Strip <BR>镀镍 Nickel Plated <BR>镀铬 Chrome Plated <BR>镀黄铜 Brass Plated <BR>基层金属 Base Metal of Plated Metal Strip <BR>低碳钢或铁基层金属 <BR>Iron &amp; Low Carbon as Base Metal <BR>不锈钢基层金属 Stainless Steel as Base Metal <BR>铜基层金属 <BR>Copper as Base Metal <BR>黄铜基层金属 <BR>Brass as Base Metal <BR>轴承合金 Bearing Alloy <BR>简介 <BR>General <BR>轴承合金 – 日工标准 JIS H 5401 <BR>Bearing Alloy to JIS H 5401 <BR>锡基、铅基及锌基轴承合金比较表 <BR>Comparison of Tin base, Lead base and Zinc base alloy for Bearing purpose <BR>易溶合金 Fusible Alloy <BR>焊接合金 Soldering and Brazing Alloy <BR>软焊 Soldering Alloy <BR>软焊合金 – 日本标准 JIS H 4341 <BR>Soldering Alloy to JIS H 4341 <BR>硬焊 Brazing Alloy <BR>其它焊接材料请参阅日工标准目录 <BR>Other Soldering Material <BR>细线材、枝材、棒材 <BR>Chapter Five Wire, Rod &amp; Bar <BR>线材/枝材材质分类及制成品 <BR>Classification and End Products of Wire/Rod <BR>铁线(低碳钢线)日工标准 JIS G 3532 <BR>Low Carbon Steel Wires ( Iron Wire ) to JIS G 3532 <BR>光线(低碳钢线)，火线(退火低碳钢线)，铅水线 (镀锌低碳钢线)及制造钉用低碳钢线之代号、公差及备注 <BR>Ordinary Low Carbon Steel Wire, Annealed Low Carbon Steel Wire, Galvanized low Carbon Steel Wire &amp; Low Carbon Steel Wire for nail manufacturing - classification, Symbol of Grade, Tolerance and Remarks. <BR>机械性能 <BR>Mechanical Properites <BR>锌包层之重量，铜硫酸盐试验之酸洗次数及测试用卷筒直径 <BR><BR>Weight of Zinc-Coating, Number of Dippings in Cupric Sulphate Test and Diameters of Mandrel Used for Coiling Test <BR>冷冲及冷锻用碳钢线枝 <BR>Carbon Steel Wire Rods for Cold Heading &amp; Cold Forging (to JIS G3507) <BR>级别，代号及化学成份 <BR>Classification, Symbol of Grade and Chemical Composition <BR>直径公差，偏圆度及脱碳层的平均深度 <BR>Diameter Tolerance, Ovality and Average Decarburized Layer Depth <BR>冷拉钢枝材 <BR>Cold Drawn Carbon Steel Shafting Bar <BR>枝材之美工标准，日工标准，用途及化学成份 <BR>AISI, JIS End Usage and Chemical Composition of Cold Drawn Carbon Steel Shafting Bar <BR>冷拉钢板重量表 <BR>Cold Drawn Steel Bar Weight Table <BR>高碳钢线枝 <BR>High Carbon Steel Wire Rod (to JIS G3506) <BR>冷拉高碳钢线 <BR>Hard Drawn High Carbon Steel Wire <BR>(to JIS G3521, ISO-84580-1&amp;2) <BR>化学成份分析表 <BR>Chemical Analysis of Wire Rod <BR>线径、公差及机械性能(日本工业标准 G 3521) <BR>Mechanical Properties (JIS G 3521) <BR>琴线(日本标准 G3522) <BR>Piano Wires ( to G3522) <BR>级别，代号，扭曲特性及可用之线材直径 <BR>Classes, symbols, twisting characteristic and applied Wire Diameters <BR>直径，公差及拉力强度 <BR>Diameter, Tolerance and Tensile Strength <BR>裂纹之容许深度及脱碳层 <BR>Permissible depth of flaw and decarburized layer <BR>常用的弹簧不锈钢线-编号，特性，表面处理及化学成份 <BR>StainlessSpring Wire – National Standard number, Charateristic, Surface finish &amp; Chemical composition <BR>弹簧不锈钢线，线径及拉力列表 <BR>Stainless Spring Steel, Wire diameter and Tensile strength of Spring Wire <BR>处理及表面状况 <BR>Finish &amp; Surface <BR>各种不锈钢线在不同处理拉力比较表 <BR>Tensile Strength of various kinds of Stainless Steel Wire under Different Finish <BR>圆径及偏圆度之公差 <BR>Tolerance of Wire Diameters &amp; Ovality <BR>铬镍不锈钢及抗热钢弹簧线材 – <BR>美国材验学会 ASTM A313 – 1987 <BR>Chromium – Nickel Stainless and Heat-resisting Steel Spring Wire – ASTM A313 – 1987 <BR>化学成份 Chemical Composition <BR>机械性能 Mechanical Properties <BR>305, 316, 321及347之拉力表 <BR>Tensile Strength Requirements for Types 305, 316, 321 and 347 <BR>A1S1-302 贰级线材之拉力表 <BR>Tensile Strength of A1S1-302 Wire <BR>日本工业标准 – 不锈钢的化学成份(先数字后字母排列) <BR>JIS – Chemical Composition of Stainless Steel (in order of number &amp; alphabet) <BR>美国工业标准 – 不锈钢及防热钢材的化学成份 <BR>(先数字后字母排列) <BR>AISI – Chemical Composition of Stainless Steel &amp; Heat-Resistant Steel(in order of number &amp; alphabet) <BR>易车碳钢 <BR>Free Cutting Carbon Steels (to JIS G4804 ) <BR>化学成份 Chemical composition <BR>圆钢枝，方钢枝及六角钢枝之形状及尺寸之公差 <BR>Tolerance on Shape and Dimensions for Round Steel Bar, Square Steel Bar, Hexagonal Steel Bar <BR>易车(快削)不锈钢 Free Cutting Stainless Steel <BR>易车(快削)不锈钢种类 Type of steel <BR>易车(快削)不锈钢拉力表 <BR>Tensile Strength of Free Cutting Wires <BR>枝/棒无芯磨公差表 (μ) (μ = 1/100 mm) <BR>Rod/Bar Centreless Grind Tolerance <BR>易车不锈钢及易车钢之不同尺寸及硬度比较 <BR>Hardness of Different Types &amp; Size of Free Cutting Steel <BR>扁线、半圆线及异形线 <BR>Flat Wire, Half Round Wire, Shaped Wire and Precision Shaped Fine Wire <BR>加工方法 <BR>Manufacturing Method <BR>应用材料 <BR>Material Used <BR>特点 <BR>Characteristic <BR>用途 <BR>End Usages <BR>不锈钢扁线及半圆线常用材料 <BR>Commonly used materials for Stainless Flat Wire &amp; Half Round Wire <BR>扁线公差 <BR>Flat Wire Tolerance <BR>方线公差 <BR>Square Wire Tolerance

k-scopion

顶

jerry77

<P>ding</P>