请问各位大侠，MC9。1后处理如何改MPFA，才能得到自己想要的后处理呀？还有用写字本打开它，里面的那些参数何解呀？
# Post Name : MPFAN
# Product : MILL
# Machine Name : GENERIC FANUC
# Control Name : GENERIC FANUC
# Description : GENERIC FANUC MILL POST
# 4-axis/Axis subs. : YES
# 5-axis : NO
# Subprograms : YES
# Executable : MP v9.10
#
# WARNING: THIS POST IS GENERIC AND IS INTENDED FOR MODIFICATION TO
# THE MACHINE TOOL REQUIREMENTS AND PERSONAL PREFERENCE.
#
# --------------------------------------------------------------------------
# Revision log:
# --------------------------------------------------------------------------
# Programmers Note:
# CNC 01/12/01 - Initial post update for V8.1
# CNC 07/02/01 - Add cantext to cancel drill and tool retract
# CNC 01/09/02 - Initial post update for V9.0
# CNC 01/31/02 - Set usecandrill, usecanpeck, force_wcs to YES
# CNC 02/22/02 - Forces output of I,J,K arc centers (arcoutput:0)
# CNC 04/12/02 - Use original position for inverse feed and 4 ax paths
# CNC 05/01/02 - Set "helix_arc:2", support helix arc output in XY plane
# CNC 05/07/02 - Do not update sav_rev with axis substitution
# CNC 11/06/02 - Altered 'F'eedrate output format when tapping (G74/G84)
# CNC 01/06/03 - moved feed assignment below pcom_moveb to address bug w/feed in 4 axis
# CNC 01/17/03 - Added flags to allow reversal of axis orientations
# CNC 02/04/03 - Initial post update for V9.1
#
# --------------------------------------------------------------------------
# Features:
# --------------------------------------------------------------------------
# This post supports Generic Fanuc code output for 3 and 4 axis milling.
# It is designed to support the features of Mastercam Mill V9.
#
# Following Misc. Integers are used:
#
# mi1 - Work coordinate system
# 0 = Reference return is generated and G92 with the
# X, Y and Z home positions at file head.
# 1 = Reference return is generated and G92 with the
# X, Y and Z home positions at each tool.
# 2 = WCS of G54, G55.... based on Mastercam settings.
#
# mi2 - Absolute or Incremental positioning at top level
# 0 = absolute
# 1 = incremental
#
# mi3 - Select G28 or G30 reference point return.
# 0 = G28, 1 = G30
#
#Canned text:
# Entering cantext on a contour point from within Mastercam allows the
# following functions to enable/disable.
# Cantext value:
# 1 = Stop = output the "M00" stop code
# 2 = Ostop = output the "M01" optional stop code
# 3 = Bld on = turn on block delete codes in NC lines
# 4 = bLd off = turn off block delete codes in NC lines
#
#Milling toolpaths (4 axis)
#Layout:
# The term "Reference View" refers to the coordinate system associated
# with the Top view (Alt-F9, the upper gnomon of the three displayed).
# Create the part drawing with the axis of rotation about the axis
# of the "Reference View" according to the setting you entered for
# 'vmc' (vertical or horizontal) and 'rot_on_x' (machine relative
# axis of rotation).
# vmc = 1 (vertical machine) uses the top toolplane as the base machine
# view.
# vmc = 0 (horizontal machine) uses the front toolplane as the base machine
# view.
# Relative to the machine matrix -
# Rotation zero position is on the Z axis for rotation on X axis.
# Rotation zero position is on the Z axis for rotation on Y axis.
# Rotation zero position is on the X axis for rotation on Z axis.
# The machine view rotated about the selected axis as a "single axis
# rotation" are the only legal views for 4 axis milling. Rotation
# direction around the part is positive in the CCW direction when
# viewed from the plus direction of the rotating axis. Set the variable
# 'rot_ccw_pos' to indicate the signed direction. Always set the work
# origin at the center of rotation.
#
#Toolplane Positioning:
# Create the Cplane and Tplane as the rotation of the machine view about
# the selected axis of rotation. The toolplane is used to calculate
# the position of the rotary axis. This is the default setting.
# |
|小黑屋|手机版|模具论坛
( 浙ICP备15037217号 )
发表于 2008-6-17 19:14:13
/5 
