Release Level: 6.0
9k_adv
Part Name: 9k
Material Supplier: Dow Chemicals Europe
Material Grade: Styron 492U
Max Injection Pressure: 140.00 MPa
Mold Temperature: 50.00 deg.C
Melt Temperature: 220.00 deg.C
Model Suitability: Part model was highly suitable for analysis.
9k_adv
Moldability: Your part may be difficult to fill and part quality may be unacceptable.
View the Confidence of Fill plot and use the Dynamic Adviser to get help on how to improve the filling of the part.
Confidence: Medium
Injection Time: 1.74 sec
Injection Pressure: 120.11 MPa
Weld Lines: Yes
Air Traps: Yes
Shot Volume (cavity, runner): 556.49 cu.cm ( 521.92, 34.57 )
Filling Clamp Force: 824.36 tonne
Packing Clamp Force Estimate @20%: ( 24.02 )MPa 432.15 tonne
Packing Clamp Force Estimate @80%: ( 96.09 )MPa 1728.62 tonne
Packing Clamp Force Estimate @120%: ( 144.14 )MPa 2592.93 tonne
Clamp Force Area: 1764.23 sq.cm
Cycle Time: 10.47 sec
Warnings:
IMPORTANT INFORMATION:
The analysis results herein are believed to be reliable but are not to be construed as providing a warranty, including any warranty of merchantability or fitness for purpose, or representation for which Moldflow Corporation assumes legal responsibility. Users should undertake sufficient verification and testing to determine the suitability for their own particular purpose of any information presented herein. Nothing herein is to be taken as permission, inducement, or recommendation by Moldflow Corporation to practice any patented invention without a license or in any way infringe upon the intellectual property rights of any other party.
|