[求助] moldflow4.0的安装方法谁有啊，谢谢了

ldc1980

[求助] moldflow4.0的安装方法谁有啊，谢谢了

ldc1980

<P>MoldFlow Plastic Insight v4.01</P><P>1. Run setup and install Plastic Insight. When prompted for a license server
   type, select "Use a license server on this computer". After Plastic Insight
   has been installed you will be prompted to install SentinelLM software.
   Install the SentinelLM software and reboot.
   
2. Run 401.exe (in crack dir) for the "Sp" directory. The service pack will take some time to
   run so be patient.
   
3. Install MDL from CD 2. MDL is required for Pro/e, Parasolid and Step file
   translation.
   
4. Open the crack directory and execute "execute moldflowkeyg.exe".Press generate
   which will create to files called moldflow.key and modflow2.key which will be
   used in step 5.
   
5. Launch "startmenu=&gt;Moldflow Plastics Insight 4.0=&gt;License Administration=&gt;Add License Keys.
   Wait for the program to complete the network scan which will say ready on bottom left
   when it has completed. Now, press the browse button and select the moldflow.key and press
   the "Install Key" button. Close the confirmation dialog box when it pops up. You will
   need to repeat this procedure for the second key "moldflow2.key.
   
6. Go OFFLINE, start Moldflow go to menu file=&gt;preferences active the Internet tab and uncheck
   "Automatically launch Moldflow Community Center".
   
7. If you have any problem with the licensing go to C:\Program Files\Rainbow Technologies
   \SentinelLM 7.1.1 Server\English. Run "loadls.exe" and hit the add button. Reboot and
   run the program.</P><P>谁给我翻译一下谢谢</P>