<P>Copyright Moldflow Corporation and Moldflow Pty. Ltd. All Rights Reserved.<BR>(C)1993 1994 1995 1996 1997 1998 1999 2000 <BR>(C)2001 2002 2003 2004 <BR>This product may be covered by<BR> US patent 6,096,088 ,<BR> Australian Patent No. 721978 ,<BR>and foreign patents and pending applications</P>
<P><BR>Cool Analysis</P>
<P><BR>Version: mpi500 (Build 04305)</P>
<P>Analysis running on host: cyf-6a451a1ad71<BR> Operating System: Windows 2000 Service Pack 4<BR> Processor type: AuthenticAMD x86 Family 6 Model 4 Stepping 2 ~851 MHz<BR> Number of Processors: 1 <BR> Total Physical Memory: 127 MBytes</P>
<P><BR>Analysis commenced at Sun Oct 30 10:49:02 2005<BR>Executed: Sun Oct 30 10:49:03 2005<BR> Mesh Type = Fusion<BR> Number of nodes = 6595 <BR> Number of beam elements = 156 <BR> Number of triangular elements = 12864 <BR> Number of tetrahedral elements = 0 <BR> <BR>Reading nodal data...<BR>Reading beam element data...<BR>Reading triangular element data...<BR> Method of calculating geometrical influence = Ideal <BR> <BR> Cooling analysis type = Manual<BR> <BR> Total number of part elements = 12892 <BR> Total number of runner elements = 28 <BR> Total number of mold elements = 128 <BR> Total number of circuit elements = 128 <BR> Co-ordinates of part extremity:<BR> X Y Z<BR> Maximum 108.01500 mm 9.75000 mm 59.24000 mm<BR> Minimum -43.60020 mm -9.80833 mm -9.47515 mm<BR> Orientation 259.62999 mm 29.30830 mm 127.95500 mm</P>
<P>** WARNING 701360 ** Beam element 12877 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12878 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12879 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12880 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12881 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12882 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12883 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12884 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12899 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12900 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12901 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12902 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12903 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12904 has a very bad length/diameter ratio</P>
<P>** WARNING 701380 ** Warnings were reported in the model<BR> Check the mesh quality of the model </P>
<P> Using mesh aggregation</P>
<P><BR>** WARNING 701360 ** Beam element 12877 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12878 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12879 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12880 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12881 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12882 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12883 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12884 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12899 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12900 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12901 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12902 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12903 has a very bad length/diameter ratio</P>
<P>** WARNING 701360 ** Beam element 12904 has a very bad length/diameter ratio</P>
<P>** WARNING 701380 ** Warnings were reported in the model<BR> Check the mesh quality of the model </P>
<P> Total Mbytes required for cooling analysis = 274.68 <BR> Total Mbytes available for cooling analysis = 2994.04 <BR> Mold boundaries have not been modelled, using <BR> X Y Z<BR> 349.02000 mm 189.20000 mm 172.04000 mm </P>
<P>Now beginning the task: Input part model <BR>Current time is: Sun Oct 30 10:51:07 2005 </P>
<P>Now beginning the task: Input mold model <BR>Current time is: Sun Oct 30 10:51:07 2005 <BR>Performing cooling network analysis</P>
<P><BR>+---------+-------------+-----------------------+--------------+-------------+ <BR>| Inlet |Flowrate | Reynolds No. |Press. drop | Pumping |<BR>| node |in/out | range | over | power over |<BR>| | | | circuit | circuit |<BR>| | (lit/min) | | (MPa) | (kW) |<BR>+---------+-------------+-----------------------+--------------+-------------+ <BR>| 6532 | 4.23 | 10000.0 - 10000.0 | 0.0007 | 4.795e-05 |<BR>| 6561 | 4.23 | 10000.0 - 10000.0 | 0.0007 | 4.810e-05 |<BR>| 6516 | 4.23 | 10000.0 - 10000.0 | 0.0016 | 1.152e-04 |<BR>| 6555 | 4.23 | 10000.0 - 10000.0 | 0.0016 | 1.152e-04 |<BR>| 6626 | 4.23 | 10000.0 - 10000.0 | 0.0025 | 1.739e-04 |<BR>| 6625 | 4.23 | 10000.0 - 10000.0 | 0.0025 | 1.737e-04 |<BR>| 6583 | 4.23 | 10000.0 - 10000.0 | 0.0025 | 1.737e-04 |<BR>| 6584 | 4.23 | 10000.0 - 10000.0 | 0.0025 | 1.739e-04 |<BR>+---------+-------------+-----------------------+--------------+-------------+ </P>
<P>Now beginning the task: Boundary Integration <BR>Current time is: Sun Oct 30 10:51:07 2005 </P>
<P>** WARNING 700940 ** Two elements are too close <BR> Check element 2372 in the Part_model and element 1549 in the Part_model</P>
<P>** WARNING 700940 ** Two elements are too close <BR> Check element 8810 in the Part_model and element 7987 in the Part_model</P>
<P>** WARNING 700940 ** Two elements are too close <BR> Check element 1549 in the Part_model and element 2372 in the Part_model</P>
<P>** WARNING 700940 ** Two elements are too close <BR> Check element 7987 in the Part_model and element 8810 in the Part_model</P>
<P>Now beginning the task: Solution of equilibrium TMP field <BR>Current time is: Sun Oct 30 10:53:25 2005 <BR>+----------+----------+----------+----------+----------+----------+----------+<BR>|External |Cycle time|Avg temp |Avg temp |Dif temp |Dif temp |Circ temp |<BR>|iteration | (s) |iteration |deviation |iteration |deviation |residual |<BR>+----------+----------+----------+----------+----------+----------+----------+<BR>| 1 | 35.000 | 11 | 5.000000 | 0 | 0.000000 | 1.000000 | <BR>| 1 | 35.000 | 14 | 3.750000 | 0 | 0.000000 | 1.000000 | <BR></P> |
|小黑屋|手机版|模具论坛
( 浙ICP备15037217号 )
发表于 2005-11-6 14:45:00
楼主
/5 
