ArtCAM Pro 2008 news

tsh-alan · 发表于 2007-8-22 13:45:00

ArtCAM Pro 2008 offers all the original features of ArtCAM Pro 9.1 and the following new features:<ul class="listbullet"><li class="listbullet"><a class="jumptemplate" id="h66170" title="New ArtCAM Workflow" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/66059.htm" target="_self">New ArtCAM Workflow</a>. In previous versions of ArtCAM Pro, you could only work with models. You can now work with projects, in which you can store multiple models, assemblies and replica meshes. </li><li class="listbullet"><a class="jumptemplate" id="h66171" title="Enhanced Project Tree" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/63354.htm" target="_self">Enhanced Project Tree</a>. Following the introduction of projects, the Project Tree on the Project tab has changed. Each of the new items in the Project Tree has its own associated context-menu. Almost all of the items familiar to the Project Tree in previous versions of ArtCAM Pro either have an entirely new context-menu or additional options. It is now far easier to work directly from the Project Tree. </li><li class="listbullet"><a class="jumptemplate" id="h66172" title="Revised File Menu Options" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/64500.htm" target="_self">Revised File Menu Options</a>. As a result of the new workflow and features in ArtCAM Pro, there have been changes to the Main Menu bar layout. </li><li class="listbullet"><a class="jumptemplate" id="h66173" title="Enhanced Bitmap Import" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/65065.htm" target="_self">Enhanced Bitmap Import</a>. You can now create a new model from a broader range of bitmap image files, or import any of them into an open ArtCAM model as a new bitmap layer: </li><li class="listbullet"><a class="jumptemplate" id="h66174" title="Enhanced 3D Model Import" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/65064.htm" target="_self">Enhanced 3D Model Import</a><a class="jumptemplate" id="h66174_2" title="Enhanced 3D Model Import" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/65064.htm" target="_self">.</a> You can now import a broad range of triangle and surface models into an open ArtCAM model as a relief or as a replica mesh in the Project Tree. </li><li class="listbullet"><a class="jumptemplate" id="h68211" title="Enhanced Bitmap To Vector Tool" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/67113.htm" target="_self">Enhanced Bitmap To Vector Tool</a>. In previous versions of ArtCAM Pro, the Vectors From Bitmap dialog box allowed you to create vector artwork around the outline of all areas of an image on a bitmap layer drawn in the current Primary Colour, together with those colours from the Colour Palette linked to the Primary Colour. All of the settings associated with the Vectors From Bitmap dialog box have now been consolidated onto a single page of settings displayed in the Assistant window. Moreover, you can now calculate a vector centreline from all areas of the bitmap layer in the current Primary Colour, together with those colours that are linked to the Primary Colour. This is particularly useful for calculating a centreline from bitmap images of text. </li><li class="listbullet"><a class="jumptemplate" id="h68212" title="Modified Primary and Secondary Colours" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/67145.htm" target="_self">Modified Primary and Secondary Colours</a>. In previous versions of ArtCAM Pro, the default Primary Colour in the Colour Palette is white and the default Secondary Colour is black. The default Primary Colour is now black and the default Secondary Colour is white. </li><li class="listbullet"><a class="jumptemplate" id="h66182" title="Enhanced Swept Profile Tools" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/66181.htm" target="_self">Enhanced Swept Profile Tools</a>. All of the settings previously found in each of the steps associated with the Extrude, Spin and Turn Wizards have each been consolidated onto a single page of settings displayed in the Assistant window. </li><li class="listbullet"><a class="jumptemplate" id="h66179" title="Enhanced Shape Editor" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/63845.htm" target="_self">Enhanced Shape Editor</a>. In previous versions of ArtCAM Pro, you could only create three-dimensional shapes using the Shape Editor tool and the bitmap image shown in the 2D View window. You can now project an image hosted on a bitmap layer onto the composite relief shown in the 3D View window and then use the Shape Editor tool to create three-dimensional shapes on a selected relief layer directly from there. </li><li class="listbullet"><a class="jumptemplate" id="h66176" title="New Magic Wand Tool" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/64499.htm" target="_self">New Magic Wand Tool</a>. You can now create vector boundaries around adjacent consistently coloured areas of a bitmap layer or contiguous areas of the composite relief at a consistent height. </li><li class="listbullet"><a class="jumptemplate" id="h68210" title="New Vector Boundary Tool" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/64115.htm" target="_self">New Vector Boundary Tool</a>. You can now create vector boundaries from the composite relief or a selected relief layer. The resulting vector artwork can be used as an efficient machining boundary in several toolpaths, a boundary for envelope distortion, smoothing, applying texture or scaling, and for cleaning-up scanned data. </li><li class="listbullet"><a class="jumptemplate" id="h66180" title="Enhanced Interactive Sculpting" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/64558.htm" target="_self">Enhanced Interactive Sculpting</a>. You can now limit the reach of any of the tools available when sculpting the composite relief. This is particularly useful for engraving work which demands a strict Z range. </li><li class="listbullet"><a class="jumptemplate" id="h66191" title="Enhanced Lights and Material Settings" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/64687.htm" target="_self">Enhanced Lights and Material Settings</a>. The new Modelling Default and Simulation Default shading options replace the Default option available in previous versions of ArtCAM Pro. The settings associated with the Default option available in previous versions of ArtCAM Pro are now named Old Default. You can store custom settings as the Modelling Default and the Simulation Default so that these are used when viewing the composite relief and simulated toolpaths in the 3D View window. </li><li class="listbullet"><a class="jumptemplate" id="h66183" title="New Relief Layer Thumbnails" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/63353.htm" target="_self">New Relief Layer Thumbnails</a>. In previous versions of ArtCAM Pro, it was not possible to determine the content on a specific relief layer unless it was actually visible in the 3D View window. Each relief layer now has its own thumbnail image, allowing you to check its content irrespective of whether it is currently visible in the 3D View window or not. </li><li class="listbullet"><a class="jumptemplate" id="h66177" title="New Slice Relief Tool" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/63846.htm" target="_self">New Slice Relief Tool</a>. The new Slice Relief tool allows you to divide the composite relief or the content on a single relief layer into slices. </li><li class="listbullet"><a class="jumptemplate" id="h66184" title="Enhanced Machine Relief Toolpath" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/64454.htm" target="_self">Enhanced Machine Relief Toolpath</a>. </li><li class="listbullet"><a class="jumptemplate" id="h68213" title="Enhanced Feature Machining Toolpath" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/66356.htm" target="_self">Enhanced Feature Machining Toolpath</a>. </li><li class="listbullet"><a class="jumptemplate" id="h68216" title="Enhanced Z Level Roughing Toolpath" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/68214.htm" target="_self">Enhanced Z Level Roughing Toolpath</a>. </li><li class="listbullet"><a class="jumptemplate" id="h68217" title="Enhanced Smart Engraving Toolpath" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/68215.htm" target="_self">Enhanced Smart Engraving Toolpath</a>. When creating a Smart Engraving toolpath you can now define the upper bound of an interior corner for the purpose of sharpening the corners at the top of the selected vector artwork and inserting tails. Furthermore, the overall calculation time for the toolpath is noticeably faster and its resulting moves are far cleaner. </li><li class="listbullet"><a class="jumptemplate" id="h68367" title="New Drill Bank Toolpath" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/68270.htm" target="_self">New Drill Bank Toolpath</a>. </li><li class="listbullet"><a class="jumptemplate" id="h68368" title="Enhanced Drilling Toolpath" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/68272.htm" target="_self">Enhanced Drilling Toolpath</a>. When creating drill holes, you can now define the height above the material block at which you want your cutting tool to make the transition from the rapid rate to the plunge rate, which prevents the tool colliding with uneven material surfaces during rapid moves. </li><li class="listbullet"><a class="jumptemplate" id="h66186" title="Enhanced Toolpath Batch Calculation" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/65379.htm" target="_self">Enhanced Toolpath Batch Calculation</a>. </li><li class="listbullet"><a class="jumptemplate" id="h66185" title="Enhanced Toolpath Transform" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/64409.htm" target="_self">Enhanced Toolpath Transform</a>. </li><li class="listbullet"><a class="jumptemplate" id="h66189" title="Enhanced Toolpath Simulation" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/64559.htm" target="_self">Enhanced Toolpath Simulation</a>. You can now define the resolution of the toolpath simulation or render any toolpath simulation shown in the 3D View window from a choice of twenty-two shading sets available from the Shading list box in the Toolpath Simulation area of the Toolpaths Home page. </li><li class="listbullet"><a class="jumptemplate" id="h66190" title="New Toolpath Simulation To Relief Layers Tool" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/64456.htm" target="_self">New Toolpath Simulation To Relief Layer Tool</a>. You can now create a new relief layer from a toolpath simulation shown in the 3D View window. </li><li class="listbullet"><a class="jumptemplate" id="h68369" title="Enhanced ArtCAM Options Page" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/68273.htm" target="_self">Enhanced ArtCAM Options Page</a>. You can now control which type of bridges, or tabs, are created by default in ArtCAM Pro. Three-dimensional bridges possess a triangular cross-section and do not have any associated retract or plunge moves. </li><li class="listbullet"><a class="jumptemplate" id="h66175" title="Enhanced Twiddle Tool" href="mk:@MSITStore:D:\Program%20Files\ArtCAM%202008\Exec\Language\en\WhatsNew.chm::/64691.htm" target="_self">Enhanced Twiddle Tool</a>. Continuing advances in 3D graphics hardware are now utilised by ArtCAM Pro to provide appreciably faster manipulation of the content shown in the 3D View window.</li></ul>Only new features available in ArtCAM Pro are documented here.<script>[script]null[/script]</script>

luoucom · 发表于 2007-8-22 16:33:00

唉!有中文的吗?楼主有没有试用啊?

dghgtjh · 发表于 2009-12-8 22:37:37

看不懂啊
太难了

jinmaqing · 发表于 2010-1-1 22:14:28

全是英文呀，看不懂啦

jinmaqing · 发表于 2010-1-1 22:16:22

能不能用中文呀，实在是太难啦

		自动登录	找回密码
密码			注册

申请者注册名：		*默认获取当前用户名
性别：	男女
年龄：		*请填写您的真实年龄
职业：		*请填写您当前的职业
申请版区名称：		*请选择您申请的版区
联系电话：		*请填写您的联系电话，此项必填！
我的QQ：		*请填写您的QQ，此项必填！
我的专业特长：		*请填写您的特长领域
申请理由：		*请填写您为什么要申请的理由
管理措施：		*您准备以何种措施管理申请的版块？

ArtCAM Pro 2008 news

招聘信息 /5

求职信息 /5

技术求助 /5

×